Foam Filled Tube for Live Working

Foam Filled Fiberglass Hot Stick Blanks
1. Standards: IEC 60855
2. Material: E-glass fiber in epoxy resin matrix and filled with closed cell plastic foam.
3. Process: Continuous Filament Winding Pultrusion
4. Properties: A. High stiffness to weight ratio,
B. Moisture and corrosion Resistant,
C. Excellent electrical and mechanical
D. 100% electrically proof tested
(100kV/12" (305mm) for 5 minutes without detectable)
5. The diameter and Length as the table 1.

Foam Filled Fiberglass Hot Stick Blanks
No.: Dimensions Dia. X Length: Weight: Mm X m: In. X ft. Kgs lbs.
AD001: 31.7 X 1.2: 1.25 X 4: 0.7 1.5
AD002: 31.7 X 1.8: 1.25 X 6: 1.0 2.3
AD003: 31.7 X 2.4: 1.25 X 8: 1.4 3
AD004: 31.7 X 3: 1.25 X 10: 1.7 3.8
AD005: 31.7 X 3.6: 1.25 X 12: 2.0 4.5
AD006: 31.7 X 4.3: 1.25 X 14: 2.4 5.3
AD007: 38.1 X 1.2: 1.5 X 4: 0.9 12
AD008: 38.1 X 1.8: 1.5 X 6: 1.4 3
AD009: 38.1 X 2.4: 1.5 X 8: 1.8 4
AD010: 38.1 X 3: 1.5 X 10: 2.3 5
AD011: 38.1 X3.6: 1.5 X 12: 2.7 6
AD012: 38.1 X 4.3: 1.5 X 14: 3.2 7
AD013: 38.1 X 4.9: 1.5 X 16: 3.6 8
AD014: 38.1 X 5.5: 1.5 X 18: 4.1 9
AD015: 38.1 X 6: 1.5 X 20: 4.5 10